Engineering: Recent submissions

  • Kozlovskiy, Artem L.; Borgekov, Daryn B.; Zdorovets, Maxim V.; Kenzhina, Inesh E.; Shlimas, Dmitriy I. (Journal of Composites Science, 2023)
    One area that holds promise for nuclear energy advancement, which is the most attractive industry for eliminating the imbalance in the energy sector and reducing the world’s energy shortage for the long term, is the ...
  • Kozlovskiy, A.L.; Zdorovets, M.V. (Eurasian Physical Technical Journal, 2021)
    The aim of this work is to study phase transformations kinetics in ferroelectrics based on calcium titanate. The relevance of this study is in the assessment of new methods for obtaining complex phase composition ...
  • Omirzak, Islam; Ralin, Andrey; Kasatkin, Boris; Vorona-Slivinskaya, Lubov; Dubinina, Natalia (International Journal of Emerging Technologies in Learning, 2020)
    The study is devoted to the possibility of using mobile learning for the joint solution of engineering problems by students. The research aims to determine the feasibility and perceived effectiveness of the collaborative ...
  • Ashrapova, Alsu; Zharkynbekova, Sholpan; Svirina, Ludmila; Loginova, Maria (International Journal of Innovative Technology and Exploring Engineering, 2019)
    This paper is devoted to the study of a student’s linguistic personality from the standpoint of the theory of linguistic-cultural types. The relevance of the study is due to the actively developing anthropological ...
  • Giniyatova, Sholpan G.; Kozlovskiy, Artem L.; Shakirzyanov, Rafael I.; Volodina, Natalia O.; Shlimas, Dmitriy I.; Borgekov, Daryn B. (Applied Sciences, 2023)
    In this work, the structural, electrical, and mechanical properties and phase composition of high-content cubic zirconium oxide ceramics stabilized with Ca were investigated. The novelty of this work lies in evaluating ...
  • Mussakhanov, D A; Tulegenova, A T; Lisitsyn, V M; Golkovsky, M G; Lisitsyna, L A; Abdullin, Kh A; Aitzhanov, M B; Karipbayev, Zh; Kozlovsky, A; Michailov, Yu I. (IOP Conference Series: Materials Science and Engineering, 2019)
    YAG:Ce, YAGG:Ce ceramics were obtained by sintering the oxide powders in the radiation field. The results of investigations of the structure, composition and luminescence of ceramics are presented. The luminescence ...
  • Mukhlef, Omar J.; Karkush, Mahdi O.; Zhussupbekov, Askar (IOP Conference Series: Materials Science and Engineering, 2020)
    The present work deals with the performance of screw piles constructed in gypseous soil of medium relative density; such piles are extensively used in piles foundations supported structures subjected to axial forces. ...
  • Nurbekova, Zhanat; Baigusheva, Bayan (International Journal of Emerging Technologies in Learning, 2020)
    Augmented Reality, as one of the advanced technologies, increases the range of applications in various spheres of life every year. The evolution of the development and application of augmented reality in various spheres ...
  • Yergaliyeva, Banu; Seitkulov, Yerzhan; Satybaldina, Dina; Ospanov, Ruslan (Telecommunication Computing Electronics and Control, 2022)
    In this work we study some methods of storing data in the cloud for a given time using secret sharing technology. Such problems are especially relevant in the context of the rapid development of the internet of things ...
  • NAURYZBAYEV, GALYMZHAN; RABIE, KHALED M.; ABDALLAH, MOHAMED; ADEBISI, BAMIDELE (IEEE Access, 2018)
    In this paper, a two-hop amplify-and-forward relaying system, where an energy-constrained relay node entirely depends on the energy scavenged from the source signal, is investigated. This paper analyzes the performance ...
  • Nauryzbayev, Galymzhan; Alsusa, Emad; Abdallah, Mohamed (IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 2018)
    This paper presents a generalized closed-form beamforming technique that can achieve the maximum degrees of freedom in compounded multiple-input multiple-output (MIMO) broadcast channels with mixed classes of multiple-antenna ...
  • Unknown author (Eastern-European Journal of Enterprise Technologies, 2022)
    The interaction of fine particles with an expanding gas flow under fluidization conditions is considered. The objects of study are finely dispersed materials, their single particles, gas flow in a fluidized layer. ...
  • Wang, Dan; Koussour, M.; Malik, Adnan; Myrzakulov, N.; Mustafa, G. (Eurasian Physical Technical Journal C, 2023)
    We propose a logarithmic parametrization form of energy density for the scalar field dark energy in the framework of the standard theory of gravity, which supports the necessary transition from the decelerated to the ...
  • Sabira, Zulqurnain; Sakar, Mehmet Giyas; Yeskindirova, Manshuk; Saldir, Onur (Theoretical & Applied Mechanics Letters, 2020)
    The aim of the present study is to design a new fifth order system of Emden–Fowler equations and related four types of the model. The standard second order form of the Emden–Fowler has been used to obtain the new model. ...
  • Bubuianu, Laurenţiu; Nurlan, Erik; Seti, Julia O.; Vacaru, Sergiu I.; Veliev, Elşen Veli (Eurasian Physical Technical Journal C, 2024)
    We elaborate on nonmetric geometric flow theory and metric-affine gravity with applications in modern cosmology. Two main motivations for our research follow from the facts that (1) cosmological models for f(Q) modified ...
  • Daurenbekov, Kuanysh; Aitimova, Ulzada; Dauitbayeva, Aigul; Sankibayev, Arman; Tulegenova, Elmira; Yerzhan, Assel; Yerzhanova, Akbota; Mukhamedrakhimova, Galiya (International Journal of Electrical and Computer Engineering, 2024)
    This article explores the application of deep learning techniques to improve the accuracy of feature enhancements in noisy images. A multitasking convolutional neural network (CNN) learning model architecture has been ...
  • Teshev, Ilia; Bespayev, Aliy; Zhambakina, Zauresh; Murat, Tamov; Altigenov, Ulan; Zhussupov, Timur; Tolegenova, Aigerim (Buildings, 2024)
    This article presents the results of experimental studies of the stress–strain state of volumetric blocks based on the underlying frame structures. The aim of the research is to evaluate the stress–strain state and the ...
  • Yakimchuk, Dzmitry V.; Bundyukova, Victoria D.; Ustarroz, Jon; Terryn, Herman; Baert, Kitty; Kozlovskiy, Artem L.; Zdorovets, Maxim V.; Khubezhov, Soslan A.; Trukhanov, Alex V.; Trukhanov, Sergei V.; Panina, Larissa V.; Arzumanyan, Grigory M.; Mamatkulov, Kahramon Z.; Tishkevich, Daria I.; Kaniukov, Egor Y.; Sivakov, Vladimir (Sensors, 2020)
    The modern development of nanotechnology requires the discovery of simple approaches that ensure the controlled formation of functional nanostructures with a predetermined morphology. One of the simplest approaches is ...
  • ZHARTYBAYEVA, MAKPAL; MUNTAYEV, NURZHAN; TULEGENOVA, SYMBAT; ORALBEKOVA, ZHANAR; LAMASHEVA, ZHANAR; ISKAKOV, KAZIZAT (IEEE Access, 2022)
    As a result of anthropogenic impact, significant changes occur in the morphometric, hydrological, chemical and other characteristics of water bodies, which in turn leads to changes in the structure, productivity and ...
  • Sabitova, N.; Tikhonov, Y.,; Lakhno, V.,; Nyazova, R.,; Razakhova, B.; Zholdasova, S.; Ospanova, T.; Taimuratova, L. (Eastern-European Journal of Enterprise Technologies, 2023)
    The object of the research is the technology of constructing a computer ontology (CO) for electronic textbooks of the subject area (KSA). As an example, the industry is consideredinformation and communication ...

Search DSpace


Browse

My Account