Отображаемые элементы 3561-3580 из 5785

    • A Deep Learning-Based Approach for Road Surface Damage Detection 

      Kulambayev, Bakhytzhan; Beissenova, Gulbakhram; Katayev, Nazbek; Abduraimova, Bayan; Zhaidakbayeva, Lyazzat; Sarbassova, Alua; Akhmetova, Oxana; Issayev, Sapar; Suleimenova, Laura; Kasenov, Syrym; Shadinova, Kunsulu; Shyrakbayev, Abay (Computers, Materials & Continua, 2022)
      Timely detection and elimination of damage in areas with excessive vehicle loading can reduce the risk of road accidents. Currently, various methods of photo and video surveillance are used to monitor the condition of the road surface. The manual approach to evaluation and analysis of the received data can take a protracted period of time. Thus, it is necessary to improve ...
      2024-12-05
    • Acoustic Method of Quality Control of Two-Component Composite Materials 

      Saimanova, Zagira; Sukhinin, Sergey; Zhumadillayeva, Ainur; Mukhametzhanova, Aigul; Smagulova, Assemgul; Abildaeva, Gulnur (Applied Sciences, 2021)
      The features of using the acoustic method for accurately determining the concentration of components in two-component composite materials by measuring the speed of sound of long waves are described in this paper. Furthermore, explicit expressions for the volume concentrations of the matrix material and reinforcing particles or fibers of composite materials obtained by ...
      2024-12-05
    • A COMPARATIVE THERMAL ANALYSIS OF TWO WORKPIECE MATERIALS OF DIFFERENT MACHINABILITY WHEN TURNING BASED ON IR THERMOGRAPHY 

      UHRYNSKI, Andrzej; NURKUSHEVA, Saltanat; USSERBAYEV, Muratbek; HYLA, Pawel; BEMBENEK, Michał (Journal of Machine Engineering, 2024)
      The comparative thermography analysis of temperature during machining by turning was presented. For the tests cast iron EN-GJL 250 and stainless steel 1.4301 were used. The machining by turning was performed with the TNMG 220408HS PC9030 and TNMA 220208 NC6210 cutting inserts design for machining that kind of materials. The temperature was measured on the machined material ...
      2024-12-05
    • Ab Initio Modeling of CuGa1−xInxS2, CuGaS2(1−x)Se2x and Ag1−xCuxGaS2 Chalcopyrite Solid Solutions for Photovoltaic Applications 

      Grechenkov, Jurij; Gopejenko, Aleksejs; Bocharov, Dmitry; Isakoviˇca, Inta; Popov, Anatoli I.; Brik, Mikhail G.; Piskunov, Sergei (Energies, 2023)
      Chalcopyrites are ternary semiconductor compounds with successful applications in photovoltaics. Certain chalcopyrites are well researched, yet others remain understudied despite showing promise. In this study, we use ab initio methods to study CuGaS2 , AgGaS2 , and CuGaSe2 chalcopyrites with a focus on their less studied solid solutions. We use density functional theory (DFT) ...
      2024-12-05
    • AB-INITIO CALCULATIONS OF OXYGEN VACANCY IN Ga2O3 CRYSTALS 

      Usseinov, A.; Koishybayeva, Zh.; Platonenko, A.; Akilbekov, A.; Purans, J.; Pankratov, V.; Suchikova, Y.; Popov, A. I. (LATVIAN JOURNAL OF PHYSICS AND TECHNICAL SCIENCES, 2021)
      Gallium oxide β-Ga2 O3 is an important wide-band gap semiconductor. In this study, we have calculated the formation energy and transition levels of oxygen vacancies in β-Ga2 O3 crystal using the B3LYP hybrid exchange-correlation functional within the LCAO-DFT approach. The obtained electronic charge redistribution in perfect Ga2 O3 shows notable covalency of the Ga-O bonds. ...
      2024-12-05
    • A Systematic Approach to the Model Development of Reactors and Reforming Furnaces With Fuzziness and Optimization of Operating Modes 

      ORAZBAYEV, BATYR; ZHUMADILLAYEVA, AINUR; KABIBULLIN, MADYAR; CRABBE, M. JAMES C.; ORAZBAYEVA, KULMAN; YUE, XIAOGUANG (IEEE Access, 2023)
      The paper studies the problems of developing interconnected models of aggregates of complex chemical-technological systems (CTS) in conditions of scarcity and fuzziness of the initial information. Since the known methods of model development do not allow for solving these problems, we propose a systematic method that allows the development of a package of models of interconnected ...
      2024-12-05
    • Determination of the optimal shape of matrix elements partitioning on three abstract heterogeneous processors 

      Klyuyeva, Ye.G; Yavorskij, V.V.; Adamov, A.A.; Utepbergenov, I.T. (Cogent Engineering, 2020)
      The paper presents the results of a study done to find the optimal shapes of matrix element partitioning on three abstract heterogeneous processors when performing multiplication operations. An abstract processor model allows applying the research results in systems with different heterogeneous architectures. To determine the optimal partitioning shape, the work uses ...
      2024-12-05
    • Global output tracking by state feedback for highorder nonlinear systems with time-varying delays 

      Alimhan, Keylan; Mamyrbayev, Orken; Erdenova, Aigerim; Akmetkalyeva, Almira (Cogent Engineering, 2020)
      This paper focuses on the problem of global practical output tracking for a class of high-order non-linear systems with time-varying delays (via state feedback). Under mild growth conditions on the system nonlinearities involving time-varying delays, we construct a state feedback controller with an adjustable scaling gain. With the aid of a Lyapunov–Krasovskii functional, ...
      2024-12-05
    • Natural Sources in Preventive Conservation of Naturally Aged Textiles 

      Wendt, J.A; Indrie, L,; Dejeu, P,; Albu, A,; Ilieș, D.C; Costea, M,; Caciora, T,; Ilieș, G,; Hodor, N,; Josan, I,; Berdenov, Z,; Grama, V,; Safarov, B (FIBRES & TEXTILES in Eastern Europe, 2021)
      Natural antimicrobials can eliminate fungi and prevent the aging of cotton fabrics. While fungi can cause severe infections to the fabric user etc, natural antimicrobials have the advantage of not being toxic to humans. The present study showed that the essential oils of lemon (Citrus limon), lavender (Lavandula angustifolia) and mint (Mentha piperita) have inhibitory ...
      2024-12-05
    • CALCULATION OF THE BORING BAR DESIGN FOR STATIC RIGIDITY AND STRENGTH WITH SIMULTANEOUS BORING OF A STEPPED HOLE WITH FURTHER OPTIMIZATION 

      Karsakova, Nurgul; Sherov, Karibek; Donenbayev, Bakytzhan; Abulkhairov, Darmen; Sagynganova, Indira; Usserbayev, Muratbek; Teliman, Irina; Sherov, Aibek; Tussupbekova, Gulim (Journal of Applied Engineering Science, 2023)
      A method for simultaneous processing of stepped holes in the bedding of a submersible pump and the boring bar design is proposed. The results of the study of existing methods for processing stepped holes and the design of boring tools are presented. It was revealed that the considered methods and designs of tools cannot be used for processing stepped holes in the submersible ...
      2024-12-05
    • RESEARCH OF THE UNACCEPTABLE DEFECTS CAUSES IN THE MANUFACTURE OF REINFORCING ROPE 

      Buzauova, Toty; Sivachenko, Leonid; Aizhambaeva, Saulekul; Toleubayeva, Shamshygaiyn; Kaizait, Zhuldyzai; Abdugaliyeva, Gulnur (Journal of Applied Engineering Science, 2023)
      In the production of reinforcing ropes, the patenting of wire rods is carried out under the technical production regulations. Patenting is a consequence of isothermal treatment, in which the decomposition of supercooled austenite is carried out in the lower part of the temperature range of diffusion transformation. In the microstructure of patented steel, there should be ...
      2024-12-05
    • Setting Up and Implementing ArcGIS to Work with Maps and Geospatial Data with Python for Teaching Geoinformation Systems in Higher Education 

      Karelkhan, Nursaule; Kadirbek, Aknur; Schmidt, Peter (International Journal of Emerging Technologies in Learning, 2023)
      Geoinformation systems, as teaching tools in education, are closely linked to interdisciplinary and natural sciences. Currently, the application of geoinformation systems (GIS) in the educational process holds great potential for higher education. This paper presents a pedagogical system for teaching and learning a GIS course, along with a wide range of information sources that ...
      2024-12-05
    • Systematic Review of Augmented Reality Methodologies for High School Courses 

      Mukhtarkyzy, Kaussar; Abildinova, Gulmira; Serik, Meruert; Kariyeva, Kaliya; Sayakov, Olzhas (International Journal of Engineering Pedagogy, 2023)
      Augmented Reality (AR) is an emerging technology that holds vast potential for being used in pedagogy. The underlying technology of AR is becoming cheaper and ubiquitous every day as smartphones and tablets flood our markets. Numerous AR applications have been designed and developed for Android and IOS platforms to teach STEM subjects. The complexity and scope of such ...
      2024-12-05
    • Determining the Activity of Students Through the Elements of Gamification 

      Tokzhigitova, Ainur; Yermaganbetova, Madina; Tokzhigitova, Nurgul (International Journal of Engineering Pedagogy, 2023)
      This study aimed to assess the impact of gamified educational resources on students’ motivation to learn the Python programming language. The study utilized the CheckiO gaming platform to diagnose the needs and motivations of students in developing knowledge, skills, and abilities related to the use of gamified educational resources. A total of 83 students from a university in ...
      2024-12-05
    • Features of road design in difficult soil conditions 

      Zhankina, A.K.; Zhussupbekov, A.Zh.; Nurakov, S.; Imambayeva, R.S.; Kurmanova, D.T. (Smart Geotechnics for Smart Societies, 2023)
      One of the most important tasks facing the road industry is to improve the methodology and technology of road design and construction. Road design is a complicated complex of research works, which includes geological studies, determination of technical parameters, selection of design, and technological solutions. Designing in difficult ground conditions is especially ...
      2024-12-05
    • Analytical and numerical solutions for temperature distribution in topsoil layers 

      Musabaev, T.; Kayupov, T.; Seilkhanova, D.; Khafizova, G. (Smart Geotechnics for Smart Societies, 2023)
      The article analyzes the analytical and numerical solutions of heat conduction under the theory of inhomogeneous bodies. The distribution of sub-zero temperature in an inhomogeneous half-space and accounting for the continuous inhomogeneity of the heat conduction rate and internal heat dissipation sources are given for the first time. The evaluation of the obtained results ...
      2024-12-05
    • Application of in-situ static load test of pile in Nur-Sultan 

      Zhussupbekov, A.Zh.; Tleulenova, G.T.; Shakhmov, Zh.A.; Jumabayev, A.A. (Smart Geotechnics for Smart Societies, 2023)
      The paper presents discussions of the bearing capacities of precast concrete piles from construction site of the Construction of multifunctional family-entertainment and tourist area in the city of Nur-Sultan, Kazakhstan. According to the design drawings construction site was planned to be installed by precast concrete piles. PCPs were composed with crosssection of 30 cm × ...
      2024-12-05
    • Evaluation of the work of driving piles under dynamic loads 

      Tleulenova, G.T.; Omarov, A.R.; Tulebekova, A.S.; Tanyrbergenova, G.K. (Smart Geotechnics for Smart Societies, 2023)
      The aim of the work is a complex of studies of the operation of driven piles in the presence of loads. To achieve this goal, the following tasks were set: to analyze theoretical and experimental data in the field of driven pile research; carrying out a calculated assessment of the capabilities of driven piles according to regulatory documents; comparison of comparative ...
      2024-12-05
    • Architectural and historical value - The heritage of the people 

      Arynov, K.K.; Duisebay, E.K.; Sadykova, S.Sh.; Zhakhsylykova, L.A.; Khvan, E.N. (Smart Geotechnics for Smart Societies, 2023)
      The article adresses the results of staged restoration of architectural and historical monuments of educational building of Kazakh Humanitarian Law Innovative University located at Abay street 94, in Semey city and the current state of other valuable historical monuments with spiritual values and historical significance to future generations of the country
      2024-12-05
    • Reinforcement of compressed reinforced concrete structures with composite materials 

      Kuralov, U.S.; Nashraliev, Z.T.; Altigenov, U.B.; Amanov, B.N. (Smart Geotechnics for Smart Societies, 2023)
      There are presented the results of an experimental study of the strength of compressed reinforced concrete elements with polymer-reinforced plastics FIBARM TAPE 530/300. Reinforcement of compressed reinforced concrete elements with cages made of fiberreinforced plastics causes triaxial compression in concrete, in which the strength of the elements can increase several times. ...
      2024-12-05