Abstract:
The paper presents studies of cement-ash binder in the composition of concrete with
the use of a complex modified additive (CMA). The research is aimed at improving the
conditions for the production of concrete works, in particular, improving the workability of a
concrete mixture based on ash-cement binders. The main evaluation criterion of the study was
the change in the viscosity of the composition with a change in the water-binding ratio. The
measurements were carried out in two stages: at the first stage, the influence of the ash
component on the water-binding ratio was estimated, at the second stage, the issue of changing
the viscosity over time was considered. Laboratory tests were carried out using adapted
methods for measuring the spread of the mixture and determining the setting time. According
to the results of the first stage, the regularities of changes in the viscosity of the mixture by
changing the water content were obtained, and the optimal ratios of water to the binder were
obtained, depending on the percentage of the ash component. According to the results of the
second stage, the regularities of changes in the viscosity (from the liquid to the solid state) of
the mixture over the holding time, depending on the same percentage of ash were obtained. In
conclusion, the data on the optimal water-binding ratio from the conditions for the
manifestation of the ash-cement mixture of texotropic properties corresponding to the classical
cement mixture, without the inclusion of ash, are presented.
